Hey all! This week, I'm going to show you how to make a pretend ironing board for your doll! This craft goes together really quick, and makes a fun addition to your doll's "sewing studio" :)
Grab some supplies, and let's get going! You'll need cardboard, drinking straws, popsicle sticks, a toothpick or two -- and of course, some batting and fun fabric.
Cut a rectangle out of the cardboard -- mine is 10" x 4" -- and then round off the corners, so it's shaped like an ironing board. Hot glue some popsicle sticks to the underside, to give it some stability.
Cut a piece of batting the same size as your board, then glue it down to the non-popsicle-stick side.
Wrap the batting with fabric, and glue it down on the back side, trimming away any extra fabric as you go.
Then, cut a piece of fabric just smaller than the board, and glue it onto the underside. This makes the bottom of the board pretty, too!
Next, make legs for your board. Pick out four drinking straws, preferably ones without the crinkly bend in them, and use an awl or other pointy tool to poke holes in them all at the same height.
Break a toothpick in half, and run it through the straws, to connect them. Cover the ends of the toothpick with a dot of hot glue.
Open up the legs, and cut another length of straw to act as a strut. Then, glue on more pieces of straw to act as feet.
Finally, glue the legs onto the base of your board -- and voila! Your ironing board is done!
"I would cover it in little doggies because I LOVE them!"
NOW: would you like to win this ironing board (and some other goodies too?)
To enter, just leave a comment below, finishing this sentence:
"If I could have any kind of cover on my ironing board, it would look like..."
We'll run the giveaway through next Monday, August 25, pick a winner randomly, and get in touch with them via email.
They will receive the ironing board, a pretend iron, a sewing ottoman, a needle book, and a few other goodies too! Woohoo!
**Because of shipping restraints, this giveaway is only open to US residents.
Thanks everybody! Have fun with this!
For Pixie Faire,
Melinda
MY ironing board cover would have vintage fabric for sure!
It would have palm trees and warm breezes! Basically anything warm looking.
something cooling, since ironing is already a hot job.
My ironing board cover would be practical, BUT ALWAYS clean – no scorch marks!! It would be inviting – because NO ONE likes to iron – except of course when you are sewing! Right now, I am looking at my cover and need to get a new one – but I want it to be pretty – maybe ocean waves, maybe spring – but maybe a picture of someone sitting on a window bench seat looking out her window dreaming of designs!! :)
I would love a cover with pictures of my grandchildren and nieces who I am making the ironing boards for.
blue chevron fabric. Thanks for the chance to win!!!
If I could have any kind of cover on my ironing board, it would look like a basket filled with Chihuahua puppies.
Pink and brown with polka dots.
My ironing board would be covered in light, mint chevron stripes!
My iron board cover would have ocean waves crashing on shore.
big fluffy clouds and sky….
It would have to be a beach scene because thinking about the beach always makes me smile and feel good no matter what is going on in my life.
If I could have any kind of cover on my ironing board it would magically look like brand new every day no matter how much it is used and be pink or a pink based pattern. It would need to perfectly fit my 1940’s ironing board that my mom used almost daily.
“If I could have any kind of cover on my ironing board, it would be covered in shoes. Need I say more. This is the cutest accessory. Thank you for everything.
My ironing board cover would look like SPRING!!!
My ironing board cover would definitely have to be pink, blue, and purple. These are my granddaughters favorite colors.
If I could have any kind of cover on my ironing board it would be pics of my grandchildren, I would enjoy ironing more looking at their sweet faces.
My ironing board cover would look like SPRING!!
If I could have any kind of cover on my ironing board, it would look like the landscape from Tuscany or the Greece shoreline. That way I could daydream of places to go while ironing.
“If I could have any kind of cover on my ironing board, it would look like something fun, maybe polka dots or stripes in fun colors.
If I could have any kind of ironing board cover I would print a zebra stripe print. that would be fancy and jazzy enough to give my girls a sense of pizzazz as they finish a mundane chore like ironing
If I could have anything on my cover for the iron board it would have to be small flower prints in bright colors and a white back ground. with a pocket by the iron to hold a can of spay starch. or the water bottle to spray the clothes to help get out the wrinkles. I would love the information on how to make the iron. My granddaughter would love to have this. off to the craft room for sure.
Love this,
f I could have any kind of cover on my ironing board, it would look like… yours! I like the purple and the dots! Mine is light green gingham and I like it too! I like happy ironing board! Oh, but I’d also like one that has some kind of guides for 1/4", 1/2", 3/4" and 1" hems!
I would like to have on it a pretty flowered fabric. The flowers would need to be small so that it would be in proportion to the doll like it would be if I had flowers on my ironing board.
If I could have any cover design I choose I would pick a snowflake pattern because my girls are into Frozen.
My granddaughter is into golfing. I think golf fabric would be great. I made the polo dress for Isabelle and she looks great in it.
“If I could have any kind of cover on my ironing board, it would look like…” a “REAL” ironing board cover silver heat resistant top!! think I1m going to try it but use free chop sticks for the legs to make it sturdier, 2 yr old GD loves my doll house !!
I would love the ironing board to be covered in all colors and then the straws could be all different colors that would make the board pop in colors.
…a gridded cover. I also make quilts and a gridded ironing board cover would be great!
It would have to be brown and pink.
If I could have any kind of cover on my ironing board, it would look like…" antique sewing machines in miniature! (after all this is a “doll” miniature)
My girls would need a lovely floral iron board to go with their girly personalities.
It would definitely have to have the color purple as the primary color with some other pretty design on it.
This is a really nice craft project for a rainy day. Can see bright fabric to match those bright straws..girls are into those florescent colors these days. Thanks for the tutorial. Every girl gains confidence after doing these kind of projects.
This is so sweet….Great rainy day activity…I can see so bright fabric to match those bright straws…awesome!
It would have bright polka dots
As much as I love all types of brights and printed material, I would have a plain silver cover just like my grandma used to have. Maybe even a sprinkle bottle too…anyone else remember those? Good memories!!!
it would look like Lucille Ball’s ironing board on the I Love Lucy Show. If ironing boards could talk, hers would have a lot to say!
A ditsy floral— thanks!
a pattern of Jim Shore cats.
if I could any kind of cover on my ironing board it would be Dora or kittens for my granddaughter
Like grandma’s used to
My ironing board cover would have measurements and pictures of my granchildren, especially Maeve who hasDownSyndrome and is my special love.
Since it would be for my grand-daughter I would look for a material with butterflies and ladybugs or ladybugs and flowers….thanks for the tutorial.
If I could have any kind of cover on my ironing board, it would have different Americal Girls all over it!
Any Joli Pomme fabric. I always want to buy it but never to cut it up. It’d be fun too look at when dealing with frustrating projects.
Lady Bugs – love’em
I would love an ironing board cover that had measurements on it, would help a lot with ironing and cutting.
I would love a herd of flying llamas on my ironing board
It would look like it came from Kit’s era.
It would look like it came from Kit’s era.
….an ironing board cover with measurements on it. I had one of these once and it is very helpful with any projects. I think I need a new one. Good excuse to go to the fabric store.
If I make the ironing board, maybe my doll will iron her own clothes!
I dream of beaches and surfboards on my ironing board :0)
If I could have any kind of cover on my ironing board, it would look like…" my Grandma’s because I remember being so excited when I was finally old enough to help her iron some the clothes she did for other people to help them make ends meet. I still love to iron!
I think I’d like a butterfly print, a glittery fabric, or a rainbow fabric cover.
My ideal ironing cover would be gridded in 1/4 inch squares(white background with purple lines).It would have circles from 1/2inch to 12 inches in diameter superimposed on larger end of board in red. There would be a nonstick flap attached to the back side that would flip over the board for use with fusibles. A detachable pincushion and scissor holder on the end Totally practical for me and that’s why I love the colorful doll one!
a rainbow of polka dots
Palm trees on one side and flipflops on the other…make it reversible with elastic!
I would love to have the ironing board!
Looks like an easy item to make that looks like it would be fun.
Mine would be covered in cherry blossom flowers
I would love to have a mommy and me iron board. My daughters would have american girl written or different AG girl faces on it and mine would have sun bonnet sues and SAMs or paper doll fabric. The old and new eras. Awesome doll ideas you have!
I imagine a cover with cute little irons, ironing boards, and maybe even clothes on hangers …all in pretty bright colors.
Absolutely love you guys. I would love to have pink stripes and blue polka dots
Anything orange!!
Thanks for the tutorial and the chance to win.
My ironing board fabric would look like wrinkled cash… I would feel like I am ironing out wrinkled money and there would be some benefit when I’m finished!!!
If I could have any kind of cover on my ironing board it would be some kind of doll sized geometric print – oh, wait, if I make my own it COULD have it! LOL – thanks for the tutorial…
A small paisley print!
i would like antique dolls & toys printed on a muslin background, looking like old b&w or sephia toned photos.
If I could have any kind of cover on my ironing board it would have the scripture “For God so loved the world he gave his only son…”. To remind me things will always be OK.
the one my mother had!
“If I could have any kind of cover on my ironing board, it would look like…”
Horses. Cute fuzzy Shetland ponies, maybe. But definitely equine.
If I could have any kind of cover on my ironing board , it would have Minnie mouse all over it.
it had a grid with I" measurement on it.
If I could have any kind of cover on my ironing board, it would look like an antique news print to go with the antique look of the dress form I made! Love the tutorial!
If I could have anything on my ironing board cover, it would be a bunch of kitties!
If I could have any kind of cover on my ironing board, it would look like Antartica and be full of penguins!
I would love a cover with Elvis, rock n roll, etc.
A beautiful butterfly print with a pink background! :)
If I could have any kind of cover on my ironing board, it would look like the sky on a beautiful spring morning! I am new to Pixie Faire and LOVE your site and ideas!
I would love an ironing board cover with orange chevrons!
it had a tape measure and some type of grid on the fabric. Thanks for the tutorial. ccc
Annie
August 22, 2014
I would love to have a cover with 1930-40s’ paper dolls and their clothes!
Thank you for the ironing board tutorial and this fun giveaway!
How exciting!! <3